
- 日本ulavc爱发科
- 日本Sakurai桜井
- 西班牙JBC捷毕锡
- 奥谱天成
- 日本kakuhunter...
- 日本AND
- 日本大泽(OSAWA)
- 日本kokusan科库森
- 日本YUASA SYST...
- HPOWER航裕电源
- 中国YHDA怡合达
- 日本KYOWA共和
- 韩国SP
- 3nh三恩时
- 美国SIMCO-ION思...
- 美国3M
- FRK法纳克
- 意大利MASTER玛斯特
- 日本KANAGAWA神奈...
- 日信SPAIR
- 日本高柳TRINC
- 日本HIMEJIRIKA...
- 分光JASCO
- 日本KHK小原
- 中央发明chuhatsu
- 日本IEI岩下
- 八光HAKKO
- 日本荣工舍EIKO
- 日本MALCOM马康
- 日本FBC古川物产
- 日本铃木SUZUKI
- 美国Internatio...
- 日本KITO鬼头
- 日本杉崎CEDAR思达
- 日本扶桑精机FUSOSE...
- SIMCO思美高
- KONICA MINOL...
- 新宝shimpo
- 理化工业RKC
- 菊水KIKUSUI
DMVE-Q
2 Tools DME Station With Pneumatic Pump
The DME manages up to 4 tools simultaneously and is fully compatible with 10 differentJBC tools.
Check below the complete list of compatible tools.
The MVE Pneumatic Desoldering Module is indispensable for a complete desoldering
process. Clean and dry compressed air is required.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modes help to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
The DMVE works simultaneously with the DR560 Desoldering Iron and the T245 Handle.
产品构成
工具
吸锡手柄 , 通用型手柄
焊台
Stand for DR560
清洁系统
防静电安全焊嘴清洁机
技术参数
AC适配器:14.5 x 18.7 x 7.7 in / 23.40 lb
环境工作温度:10 to 40 C / 50 to 104 F
局域网(以太网):Remote control / Traceability
峰值功率:160 W per tool ? 23.5 V
焊嘴与接地间电阻:<2 ohms
焊嘴与接地间电压:<2 mV RMS
真空(6巴):90% / 680 mmHg / 26.8 inHg
Selectable Temperature:90 to 450 C / 190 to 840 F
Max. and min. temperature:Limit the temperature range in which the operator is allowed to work.
Voltage (AC):ref. DMVE-1QA - 120 V
Package:368 x 474 x 195 mm / 10.62 kg
Temperatue levels:Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection:Keep station parameters protected against unauthorized access.
Sleep and Hibernation mode:These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Control Unit:See individual modules
USB-B (rear):Software PC / Traceability
USB-A (front):Firmware update.
Robot:RS-232 remote control or Smart Fume Extractor connection
Dynamic Soldering Profiles:Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the
Soldering graphics:Real time visualization of tip temperature and power delivered to the solder joint during soldering process.
10 user interface languages:English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.
PS:Interconnection of up to 5 PSE control units to manage up to 24 tools simultaneously.
Air pressure supply:up to 6 bar
Flow rate (at 6 bar):15 SLPM
连接工具
T210-A
精密用途手柄
PA120-A
小镊夹
HT420-A
导热镊夹
DS360-A
小型吸锡手柄
DR560-A
吸锡手柄
AP250-A
送锡枪
T245-NA
氮气手柄
T245-A
通用型手柄
T210-NA
精密氮气手柄
T210-A
精密用途手柄
PA120-A
小镊夹
HT420-A
导热镊夹
DS360-A
小型吸锡手柄
DR560-A
吸锡手柄
AP250-A
送锡枪
T245-NA
氮气手柄
T245-A
通用型手柄
T210-NA
精密氮气手柄
T210-A
精密用途手柄
PA120-A
小镊夹
HT420-A
导热镊夹
DS360-A
小型吸锡手柄
DR560-A
吸锡手柄
AP250-A
送锡枪
附件
KNE-A
氮气套件
GN-A
氮气生成模块
CC3702
集线器

粤公网安备 51012402000291号